SP 115
SP 115
CLEAR EPOXY LAMINATING SYSTEM- Excellent Clarity
- Good ultra-violet resistance
- Rapid fibre wet-out
Introduction
SP 115 is a low viscosity, ultra-clear epoxy laminating system. It has been designed for the manufacture of laminates which are to remain unpainted, and where a very clear finish is required. The material also contains blue UV filters which give the product its characteristic transparent pale violet/blue colour. These filters both enhance the sharpness of embedded graphics and, when overcoated with a suitable UV-screening PU varnish, will reduce the tendancy of clear laminates to yellow after prolonged exposure to sunlight.
SP 115 also exhibits a high degree of toughness and water resistance, enhancing the strength and damage tolerance of the thin laminates typically used in sail and surfboard manufacture. Being completely solvent and styrene-free, polystyrene foam blanks can be safely used to produce boards of the lightest possible weight.
SP 115 - Combipack - 5 kg
Pack |
Resin - Hardener |
Description |
Article |
5 x 1,0 Kg |
(5x0,67 Kg Harz / 0,33 Kg Härter) |
Standard |
115RHA |
5,0 Kg |
(3,75 Kg Harz / 1,25 Kg Härter) |
Standard |
115RHB |
SP 115 - 20 kg | |||||||||||
6,66 Kg Hardener for 20 Kg Resin |
|